Expression Pedal Edit Page

This page allows you to edit the settings of each expression pedal in the system. You can edit global settings on the Globals Tab, and can override those settings in certain presets using the Presets Tab. You can also use Expression Pedal Settings Blocks to change expression pedal settings with a button press.

General Settings

Name - Allows you to name this pedal

Continuous Controllers

This section is where you specify which CC (continuous controller) messages are sent by this pedal. You can send CC messages to two devices simultaneously. Each device has the following parameters:

Device - Chooses which device you are sending to.

CC Number - Chooses which CC number is sent. You can type in the number manually, or if your device is listed by name in the device database, you can pull down a menu that contains the names and numbers of known CCs for the device.

Min Value - Specifies the CC value that will be sent when the pedal is in the heel down position.

Max Value - Specifies the CC value that will be sent when the pedal is in the heel up position.

Position Switch Actions

The expression pedal port has a position switch that can trigger Actions when the pedal goes above or below a certain position. This is separate from the built-in toe switch found on the Mission Engineering SP1-RJM pedal, which works as an External Switch and is edited using the Button Edit Page. You can use both the position switch and the toe switch at the same time if desired.

The actual position at which the switch happens has to be programmed on the Mastermind GT or PBC, but the action list can be edited on this page using the standard action editor.

Invert Position Switch - When this checkbox is not checked, the position switch is considered to be on when the pedal is between the switch position you specified and the heel up position. The position switch is considered to be off when pedal is between the specified switch position and the heel down position. When this checkbox is checked, it's reversed: heel up is off and heel down is on.