IA Cycle

IA buttons have an IA Cycle setting that allows them to become IA Cycle buttons. When enabled, the button can be configured to switch between up to 4 different button states, each with a different name (on the Mastermind GT) and color.

When IA Cycle is checked, the IA Actions box at the bottom of the window gets a second tab labeled IA Cycle Steps. Clicking on this tab displays a box for each of the four steps. In each step's box, you can select a name and color for the step.

To use these steps, switch back to the IA Actions tab. Insert Actions in the list like you normally would, but use a System / Step action as a divider between steps. (You can press the Add Step button to quickly add a Step action to the end of the list.) You should not put a Step action at the end of the list - it would be interpreted as the beginning of another step. If you put more than three Step actions in the list, that will result in more than the maximum of four steps. Any step after the fourth is ignored.

When the button is pressed, the button will advance to the next step and execute all of the actions in the list until it reaches the next Step action or the end of the list. Once the end of the action list is reached, the next button press will move back to the beginning of the action list. When using an IA Cycle button, only the On values of each action are used - the Off values are ignored.

The images on this page show an example configuration that switches between pedals in the first three loops of a Mini Effect Gizmo. Pressing the IA cycle button switches from one pedal loop to the next. Only three steps are defined in the action list, so the name and color settings for the fourth step are ignored. Note that each step turns on one loop and turns off the previously selected loop. This prevents the case where more than one loop is on at the same time.